Titre de série : |
Mémoire FPL Master Spécialisé GEER |
Titre : |
Optimisation de la fourniture en énergie électrique d’une usine de fabrications mécaniques |
Type de document : |
texte imprimé |
Auteurs : |
Aboubacar Sidiki KONE |
Année de publication : |
2010 |
Importance : |
44p. |
Langues : |
Français (fre) |
Résumé : |
Pour couronner notre formation en master spécialisé génie électrique énergétique et énergies renouvelables au 2iE, nous avons eu à effectuer un stage pratique de trois (3) mois à l’EDM SA au Mali, au cours de ce stage, nous avons traité un sujet important, qui consiste à faire l’optimisation de fourniture en énergie électrique une unité de fabrications mécaniques.
Ce projet nous a permis d’analyser tous les aspects techniques et économiques qui entrent en jeu pour faire un choix économique, dans l’alimentation d’une usine en passant par les méthodes nouvelles.
Pour cela nous avons eu à évaluer les besoins de l’usine en termes de puissance, pour ensuite déterminer la tension de transport qu’il nous faut pour l’alimentation de l’usine, ce qui nous amène à faire une discussion, entre deux (2) variantes de transport de réseaux électrique (mono-terne et bi-terne), afin de choisir la mieux économique sur le plan d’investissement et exploitation ; et aussi nous avons déterminé les points d’emplacement économique du poste abaisseur principal (PAP) et des postes de distribution interne (PD1, PD2).
Par ailleurs nous avons fait aussi le choix et le type de compensation en tenant compte du facteur du critère de maximum d’efficacité.
Il ressort au cours de cette étude que la mono-terne 45 kV a été la meilleure sur le plan technique et économique, sur laquelle portera notre choix.
Abstract : To conclude our training in master specialized energizing electric genius and renewable energies at "2iE"we had to do a practicum convenient of three (3) month to the "EDM SA" in Mali, during this practicum, we treated an important topic that consists in making the optimization of supplying in electric energy a unit mechanical manufacturing.
This project permitted us to analyze all technical and economic aspects that come into play to make an economic choice, in the energy supplying of the factory while passing by the new methods.
Hence, we had to value needs of the factory in terms of power, to determine the tension of transportation that we need for the energy supplying of the factory, what brings us to make a comparison between two (2) variants of electric network transportation (mono drab and bi - drab), in order to choose the best economic as regards to investment and exploitation; and also we determined points of sites economic of the main reducing station (PAP) and of internal distribution stations (PD1 and PD2).
Otherwise we also made the choice and the type of compensation by taking into account of the factor of the criteria of maximum of efficiency.
It comes out during this survey that the mono drab 45 KVs has been the best on the technical and economic plan, on which we will make our choice. |
Mémoire FPL Master Spécialisé GEER. Optimisation de la fourniture en énergie électrique d’une usine de fabrications mécaniques [texte imprimé] / Aboubacar Sidiki KONE . - 2010 . - 44p. Langues : Français ( fre)
Résumé : |
Pour couronner notre formation en master spécialisé génie électrique énergétique et énergies renouvelables au 2iE, nous avons eu à effectuer un stage pratique de trois (3) mois à l’EDM SA au Mali, au cours de ce stage, nous avons traité un sujet important, qui consiste à faire l’optimisation de fourniture en énergie électrique une unité de fabrications mécaniques.
Ce projet nous a permis d’analyser tous les aspects techniques et économiques qui entrent en jeu pour faire un choix économique, dans l’alimentation d’une usine en passant par les méthodes nouvelles.
Pour cela nous avons eu à évaluer les besoins de l’usine en termes de puissance, pour ensuite déterminer la tension de transport qu’il nous faut pour l’alimentation de l’usine, ce qui nous amène à faire une discussion, entre deux (2) variantes de transport de réseaux électrique (mono-terne et bi-terne), afin de choisir la mieux économique sur le plan d’investissement et exploitation ; et aussi nous avons déterminé les points d’emplacement économique du poste abaisseur principal (PAP) et des postes de distribution interne (PD1, PD2).
Par ailleurs nous avons fait aussi le choix et le type de compensation en tenant compte du facteur du critère de maximum d’efficacité.
Il ressort au cours de cette étude que la mono-terne 45 kV a été la meilleure sur le plan technique et économique, sur laquelle portera notre choix.
Abstract : To conclude our training in master specialized energizing electric genius and renewable energies at "2iE"we had to do a practicum convenient of three (3) month to the "EDM SA" in Mali, during this practicum, we treated an important topic that consists in making the optimization of supplying in electric energy a unit mechanical manufacturing.
This project permitted us to analyze all technical and economic aspects that come into play to make an economic choice, in the energy supplying of the factory while passing by the new methods.
Hence, we had to value needs of the factory in terms of power, to determine the tension of transportation that we need for the energy supplying of the factory, what brings us to make a comparison between two (2) variants of electric network transportation (mono drab and bi - drab), in order to choose the best economic as regards to investment and exploitation; and also we determined points of sites economic of the main reducing station (PAP) and of internal distribution stations (PD1 and PD2).
Otherwise we also made the choice and the type of compensation by taking into account of the factor of the criteria of maximum of efficiency.
It comes out during this survey that the mono drab 45 KVs has been the best on the technical and economic plan, on which we will make our choice. |
| ![Optimisation de la fourniture en énergie électrique d’une usine de fabrications mécaniques vignette](./images/vide.png) |