Bienvenue au Centre de Documentation et d'Information de 2iE: Plus de 27422 ouvrages vous sont proposés
Détail de l'éditeur
U.S. Departement of the Interior |
Documents disponibles chez cet éditeur (2)
Faire une suggestion Affiner la recherche
Hydraulic model studies - Aeration of the submerged jet - Flow gates at seminoe dam / Frizell, K. W.
Titre : Hydraulic model studies - Aeration of the submerged jet - Flow gates at seminoe dam Type de document : texte imprimé Auteurs : Frizell, K. W. Mention d'édition : U.S. Departement of the interior Editeur : U.S. Departement of the Interior Année de publication : 1990 ISBN/ISSN/EAN : CI-06871 Note générale : A study was performed to evaluate placement of an aeration vent on a submerged jet. Flow gate at seminoe dam. Size restrictions on the discharge tube downs tream from the gate suggested aeration as a means to project the downstream areas from cavitation damage. Four air vent location were tested. The vent on the top centerline of the discharge tube just downstream of the gate frame performed the best. Ratios of Qo/Qw greater than 10 percent were measured throught the entire range of gate openings. A minimum vent size of 16 inches in diameter is needed to keep air velocities through the vent below 200 p+/S. Langues : Anglais (eng) Mots-clés : Hydraulique Equipement Aeration Modèle hydraulique Submergence Cavitation Index. décimale : 621.2 Hydraulique : turbines, pompes, accumulateurs, transmission hydraulique Résumé : A study was performed to evaluate placement of an aeration vent on a submerged jet. Flow gate at seminoe dam. Size restrictions on the discharge tube downs tream from the gate suggested aeration as a means to project the downstream areas from cavitation damage. Four air vent location were tested. The vent on the top centerline of the discharge tube just downstream of the gate frame performed the best. Ratios of Qo/Qw greater than 10 percent were measured throught the entire range of gate openings. A minimum vent size of 16 inches in diameter is needed to keep air velocities through the vent below 200 p+/S. Note de contenu : A study was performed to evaluate placement of an aeration vent on a submerged jet. Flow gate at seminoe dam. Size restrictions on the discharge tube downs tream from the gate suggested aeration as a means to project the downstream areas from cavitation damage. Four air vent location were tested. The vent on the top centerline of the discharge tube just downstream of the gate frame performed the best. Ratios of Qo/Qw greater than 10 percent were measured throught the entire range of gate openings. A minimum vent size of 16 inches in diameter is needed to keep air velocities through the vent below 200 p+/S. Hydraulic model studies - Aeration of the submerged jet - Flow gates at seminoe dam [texte imprimé] / Frizell, K. W. . - U.S. Departement of the interior . - U.S. Departement of the Interior, 1990.
ISSN : CI-06871
A study was performed to evaluate placement of an aeration vent on a submerged jet. Flow gate at seminoe dam. Size restrictions on the discharge tube downs tream from the gate suggested aeration as a means to project the downstream areas from cavitation damage. Four air vent location were tested. The vent on the top centerline of the discharge tube just downstream of the gate frame performed the best. Ratios of Qo/Qw greater than 10 percent were measured throught the entire range of gate openings. A minimum vent size of 16 inches in diameter is needed to keep air velocities through the vent below 200 p+/S.
Langues : Anglais (eng)
Mots-clés : Hydraulique Equipement Aeration Modèle hydraulique Submergence Cavitation Index. décimale : 621.2 Hydraulique : turbines, pompes, accumulateurs, transmission hydraulique Résumé : A study was performed to evaluate placement of an aeration vent on a submerged jet. Flow gate at seminoe dam. Size restrictions on the discharge tube downs tream from the gate suggested aeration as a means to project the downstream areas from cavitation damage. Four air vent location were tested. The vent on the top centerline of the discharge tube just downstream of the gate frame performed the best. Ratios of Qo/Qw greater than 10 percent were measured throught the entire range of gate openings. A minimum vent size of 16 inches in diameter is needed to keep air velocities through the vent below 200 p+/S. Note de contenu : A study was performed to evaluate placement of an aeration vent on a submerged jet. Flow gate at seminoe dam. Size restrictions on the discharge tube downs tream from the gate suggested aeration as a means to project the downstream areas from cavitation damage. Four air vent location were tested. The vent on the top centerline of the discharge tube just downstream of the gate frame performed the best. Ratios of Qo/Qw greater than 10 percent were measured throught the entire range of gate openings. A minimum vent size of 16 inches in diameter is needed to keep air velocities through the vent below 200 p+/S. Réservation
Réserver ce document
Exemplaires(8)
Code-barres Cote Support Localisation Section Disponibilité CI03B871.49040 CI-06871 Monographie Bibliothèque CDI-Ouaga Fond documentaire Disponible CI03B871.49039 CI-06871 Monographie Bibliothèque CDI-Ouaga Fond documentaire Disponible CI03B871.49038 CI-06871 Monographie Bibliothèque CDI-Ouaga Fond documentaire Disponible CI03B871.49037 CI-06871 Monographie Bibliothèque CDI-Ouaga Fond documentaire Disponible CI03B871.49036 CI-06871 Monographie Bibliothèque CDI-Ouaga Fond documentaire Disponible CI03B871.49035 CI-06871 Monographie Bibliothèque CDI-Ouaga Fond documentaire Disponible CI03B871.49034 CI-06871 Monographie Bibliothèque CDI-Ouaga Fond documentaire Disponible CI03B871.49033 CI-06871 Monographie Bibliothèque CDI-Ouaga Fond documentaire Disponible US geological Survey Water Supply Paper, 2194. Methods for collection and analysis geopressured geothermal and oil field waters / Lico, M. S.
Titre de série : US geological Survey Water Supply Paper, 2194 Titre : Methods for collection and analysis geopressured geothermal and oil field waters Type de document : texte imprimé Auteurs : Lico, M. S. ; Kharaka, Y. K. ; Carothers, W. W. Mention d'édition : U.S. Departement of the Interior Editeur : U.S. Departement of the Interior Année de publication : 1982 ISBN/ISSN/EAN : CI-05302 Note générale : Present methods are described for the collection, preservation, and chemical analysis of water produced from geopressured geothermal and petroleum wells. Detailed procedures for collection include precautions and equipment necessary to ensure that the sample is representative of the water produced. Procedures for sample, dilution for silica, methyl isobuty ketone (MIBK) extraction of aluminum, addition of potassium permanganate to preserve mercury, and precipitation of carbonate speries as trontium... Langues : Anglais (eng) Mots-clés : Ressource en eau Hydrochimie Analyse de l'eau Méthodologie Index. décimale : 551.48 Hydrologie : Résumé : Present methods are described for the collection, preservation, and chemical analysis of water produced from geopressured geothermal and petroleum wells. Detailed procedures for collection include precautions and equipment necessary to ensure that the sample is representative of the water produced. Procedures for sample, dilution for silica, methyl isobuty ketone (MIBK) extraction of aluminum, addition of potassium permanganate to preserve mercury, and precipitation of carbonate speries as trontium... Note de contenu : Present methods are described for the collection, preservation, and chemical analysis of water produced from geopressured geothermal and petroleum wells. Detailed procedures for collection include precautions and equipment necessary to ensure that the sample is representative of the water produced. Procedures for sample, dilution for silica, methyl isobuty ketone (MIBK) extraction of aluminum, addition of potassium permanganate to preserve mercury, and precipitation of carbonate speries as trontium... US geological Survey Water Supply Paper, 2194. Methods for collection and analysis geopressured geothermal and oil field waters [texte imprimé] / Lico, M. S. ; Kharaka, Y. K. ; Carothers, W. W. . - U.S. Departement of the Interior . - U.S. Departement of the Interior, 1982.
ISSN : CI-05302
Present methods are described for the collection, preservation, and chemical analysis of water produced from geopressured geothermal and petroleum wells. Detailed procedures for collection include precautions and equipment necessary to ensure that the sample is representative of the water produced. Procedures for sample, dilution for silica, methyl isobuty ketone (MIBK) extraction of aluminum, addition of potassium permanganate to preserve mercury, and precipitation of carbonate speries as trontium...
Langues : Anglais (eng)
Mots-clés : Ressource en eau Hydrochimie Analyse de l'eau Méthodologie Index. décimale : 551.48 Hydrologie : Résumé : Present methods are described for the collection, preservation, and chemical analysis of water produced from geopressured geothermal and petroleum wells. Detailed procedures for collection include precautions and equipment necessary to ensure that the sample is representative of the water produced. Procedures for sample, dilution for silica, methyl isobuty ketone (MIBK) extraction of aluminum, addition of potassium permanganate to preserve mercury, and precipitation of carbonate speries as trontium... Note de contenu : Present methods are described for the collection, preservation, and chemical analysis of water produced from geopressured geothermal and petroleum wells. Detailed procedures for collection include precautions and equipment necessary to ensure that the sample is representative of the water produced. Procedures for sample, dilution for silica, methyl isobuty ketone (MIBK) extraction of aluminum, addition of potassium permanganate to preserve mercury, and precipitation of carbonate speries as trontium... Réservation
Réserver ce document
Exemplaires(8)
Code-barres Cote Support Localisation Section Disponibilité CI03B302.92498 CI-05302 Monographie Bibliothèque CDI-Ouaga Fond documentaire Disponible CI03B302.92497 CI-05302 Monographie Bibliothèque CDI-Ouaga Fond documentaire Disponible CI03B302.92496 CI-05302 Monographie Bibliothèque CDI-Ouaga Fond documentaire Disponible CI03B302.92495 CI-05302 Monographie Bibliothèque CDI-Ouaga Fond documentaire Disponible CI03B302.92494 CI-05302 Monographie Bibliothèque CDI-Ouaga Fond documentaire Disponible CI03B302.92493 CI-05302 Monographie Bibliothèque CDI-Ouaga Fond documentaire Disponible CI03B302.92492 CI-05302 Monographie Bibliothèque CDI-Ouaga Fond documentaire Disponible CI03B302.92491 CI-05302 Monographie Bibliothèque CDI-Ouaga Fond documentaire Disponible