Titre de série : | Mémoire FPL Master d’ingénierie Génie Civil | Titre : | Projet de construction d’un hôtel R+5 dans la ville de N’DJAMENA | Type de document : | texte imprimé | Auteurs : | Younous ADOUM | Année de publication : | 2015 | Importance : | 105p. | Langues : | Français (fre) | Résumé : | L’objectif de cette étude est de faire sortir un dossier d’exécution pour la construction d’un hôtel à N’Djamena.
Apres la présentation du site de l’implantation de l’ouvrage, une évaluation des charges (permanentes et d’exploitation) et un pré dimensionnement sont faits sur tous les éléments de la structure, ce pré dimensionnement a permis de connaitre les dimensions géométrique des éléments porteurs. Ces deux étapes, nous ont permis de faire un dimensionnement des élé-ments suivants :
- Poteaux (central, rive, angle et droit de joint) dont le calcul des armatures est fait par niveau, l’exemple du RDC poteau central (8HA20), poteau de rive (6HA20), poteau d’angle (6HA20), on rappelle que les calculs sont menés suivant les règles BAEL91 modi 99 ;
- Poutre : nous avons choisi la poutre qui a le plus grand nombre de travée, ce dimen-sionnement est réalisé sur les différents appuis et travées de la poutre choisi par exemple appui B (6HA16), travée AB (6HA20) ;
- Escalier : un escalier droit dont les résultats de calcul sur une bande de 1 m, pour le volet (6HA10, st = 17 cm), palier (6HA10, st = 17 cm) ;
- Dalle : nous avons deux types de dalle (dalle à corps creux et pleine) dont leur résultat respectif (2HA12+HA8 pour les nervures, 4HA10 en travée et 4HA8 sur les appuis).
Une fois les armatures de la superstructure sont connues, il est question de faire une étude en infrastructure, sur ce fait une analyse sur les éléments de la fondation conduisant au dimen-sionnement des semelles sous chaque poteau (semelle central, rive, angle et droit de joint) et d’une poutre raidisseur. Nous rappelons que le dimensionnent est fait par la méthode de Bielle suivant les prescriptions du DTU 13.12. Par exemple pour la semelle centrale (20HA16 dans les deux sens).
Par la suite, une étude d’un assainissement autonome du projet est fait qui nous permis de déterminer les dimensions d’une fosse septique qui comporte deux compartiments (des di-mensions : 3,53 x 2,25 x 2 m et 1,77 x 2,25 x 2 m) et un générateur de 1250 kVA est prévue au cas de délestage intempestive.
Pour avoir une idée sur le cout du projet une étude sur le devis estimatif en utilisant les prix unitaires donner par le bordereau 2011 du ministère des infrastructure et des transports , le cout total monte à un milliard cent quatre-vingt-huit millions cinq cent trente-neuf trois cent trente franc CFA tout taxe comprise(1 188 539 330 Fcfa).
Abstract : The objective of this survey is to make take a file of execution for the construction of a hotel to N’Djamena.
After the presentation of the site of the implantation of the work, an assessment of the loads (permanent and of exploitation) and a meadow dimensionality is made on all elements of the structure, this meadow dimensionality permitted to know the measurement geometric of the element carriers. These two stages, allowed us to make a dimensionality of the following el-ements:
- Posts (central, strand, angle and right of joint) of which the calculation of the armatures is made by level, the example of the RDC central post (8HA20), post of strand (6HA20), post of angle (6HA20), one recalls that the calculations are led according to the BAEL91 rules modi 99;
- Beam: we chose the beam that has the biggest number of bay, this dimensionality is achieved on the different supports and bays of the beam chosen B support for example (6HA16), AB bay (6HA20);
- Staircase: a right staircase of which the results of calculation on a strip of 1 m, for the shutter (6HA10, st = 17 cm), landing (6HA10, st = 17 cm);
- Tile: we have two types of tile (tile to hollow and full body) of which their respective result (2HA12+HA8 for the ribs, 4HA10 in bay and 4HA8 on the supports).
Once the armatures of the superstructure are known, he/it is question to make a survey in infrastructure, on this fact an analysis on the elements of the foundation driving to the Di-mensionality of the soles coins every post (sole central, strand, angle and right of joint) and of a beam raidisseur. We recall that proportion it is made by the method of Rod according to the prescriptions of the DTU 13.12. For example for the central sole (20HA16 in the two senses).
Thereafter, a survey of an autonomous purification of the project is made that permitted us to determine the measurements of a septic tank that include two compartments (of the di-mension : 3,53 x 2,25 x 2 m and 1,77 x 2,25 x 2 m) and a generator of 1250 kVA is foreseen to the case of inopportune diversion.
To have an idea on the cost of the project a survey on the approximate estimate while using the unit prices to give by the slip 2011 of the ministry of the infrastructure and transportation, the total cost brings up to one billion hundred eighty-eight millions fiv |
Mémoire FPL Master d’ingénierie Génie Civil. Projet de construction d’un hôtel R+5 dans la ville de N’DJAMENA [texte imprimé] / Younous ADOUM . - 2015 . - 105p. Langues : Français ( fre) Résumé : | L’objectif de cette étude est de faire sortir un dossier d’exécution pour la construction d’un hôtel à N’Djamena.
Apres la présentation du site de l’implantation de l’ouvrage, une évaluation des charges (permanentes et d’exploitation) et un pré dimensionnement sont faits sur tous les éléments de la structure, ce pré dimensionnement a permis de connaitre les dimensions géométrique des éléments porteurs. Ces deux étapes, nous ont permis de faire un dimensionnement des élé-ments suivants :
- Poteaux (central, rive, angle et droit de joint) dont le calcul des armatures est fait par niveau, l’exemple du RDC poteau central (8HA20), poteau de rive (6HA20), poteau d’angle (6HA20), on rappelle que les calculs sont menés suivant les règles BAEL91 modi 99 ;
- Poutre : nous avons choisi la poutre qui a le plus grand nombre de travée, ce dimen-sionnement est réalisé sur les différents appuis et travées de la poutre choisi par exemple appui B (6HA16), travée AB (6HA20) ;
- Escalier : un escalier droit dont les résultats de calcul sur une bande de 1 m, pour le volet (6HA10, st = 17 cm), palier (6HA10, st = 17 cm) ;
- Dalle : nous avons deux types de dalle (dalle à corps creux et pleine) dont leur résultat respectif (2HA12+HA8 pour les nervures, 4HA10 en travée et 4HA8 sur les appuis).
Une fois les armatures de la superstructure sont connues, il est question de faire une étude en infrastructure, sur ce fait une analyse sur les éléments de la fondation conduisant au dimen-sionnement des semelles sous chaque poteau (semelle central, rive, angle et droit de joint) et d’une poutre raidisseur. Nous rappelons que le dimensionnent est fait par la méthode de Bielle suivant les prescriptions du DTU 13.12. Par exemple pour la semelle centrale (20HA16 dans les deux sens).
Par la suite, une étude d’un assainissement autonome du projet est fait qui nous permis de déterminer les dimensions d’une fosse septique qui comporte deux compartiments (des di-mensions : 3,53 x 2,25 x 2 m et 1,77 x 2,25 x 2 m) et un générateur de 1250 kVA est prévue au cas de délestage intempestive.
Pour avoir une idée sur le cout du projet une étude sur le devis estimatif en utilisant les prix unitaires donner par le bordereau 2011 du ministère des infrastructure et des transports , le cout total monte à un milliard cent quatre-vingt-huit millions cinq cent trente-neuf trois cent trente franc CFA tout taxe comprise(1 188 539 330 Fcfa).
Abstract : The objective of this survey is to make take a file of execution for the construction of a hotel to N’Djamena.
After the presentation of the site of the implantation of the work, an assessment of the loads (permanent and of exploitation) and a meadow dimensionality is made on all elements of the structure, this meadow dimensionality permitted to know the measurement geometric of the element carriers. These two stages, allowed us to make a dimensionality of the following el-ements:
- Posts (central, strand, angle and right of joint) of which the calculation of the armatures is made by level, the example of the RDC central post (8HA20), post of strand (6HA20), post of angle (6HA20), one recalls that the calculations are led according to the BAEL91 rules modi 99;
- Beam: we chose the beam that has the biggest number of bay, this dimensionality is achieved on the different supports and bays of the beam chosen B support for example (6HA16), AB bay (6HA20);
- Staircase: a right staircase of which the results of calculation on a strip of 1 m, for the shutter (6HA10, st = 17 cm), landing (6HA10, st = 17 cm);
- Tile: we have two types of tile (tile to hollow and full body) of which their respective result (2HA12+HA8 for the ribs, 4HA10 in bay and 4HA8 on the supports).
Once the armatures of the superstructure are known, he/it is question to make a survey in infrastructure, on this fact an analysis on the elements of the foundation driving to the Di-mensionality of the soles coins every post (sole central, strand, angle and right of joint) and of a beam raidisseur. We recall that proportion it is made by the method of Rod according to the prescriptions of the DTU 13.12. For example for the central sole (20HA16 in the two senses).
Thereafter, a survey of an autonomous purification of the project is made that permitted us to determine the measurements of a septic tank that include two compartments (of the di-mension : 3,53 x 2,25 x 2 m and 1,77 x 2,25 x 2 m) and a generator of 1250 kVA is foreseen to the case of inopportune diversion.
To have an idea on the cost of the project a survey on the approximate estimate while using the unit prices to give by the slip 2011 of the ministry of the infrastructure and transportation, the total cost brings up to one billion hundred eighty-eight millions fiv |
|