Titre de série : | Mémoire FPL Master d’ingénierie Génie Civil | Titre : | Etude d’ingénierie d’un bâtiment R+4 à usage de bureau pour le compte de SYSAID FASO à Ouagadougou au Burkina Faso | Type de document : | texte imprimé | Auteurs : | Abdel Fataye ABDOU MAHAMANE | Année de publication : | 2020 | Importance : | 100 p. | Langues : | Français (fre) | Résumé : | Le projet qui nous a été confié porte sur l’étude d’un bâtiment R+4. C’est un bâtiment occupant une superficie de 1026 m^2 et dont la hauteur sous plancher est de 3,6 m pour le RDC et de 3,4 m pour les autres niveaux. Le travail qui nous a été confié consiste à dimensionner la structure en béton armé, d’en faire le dimensionnement électrique, d’évaluer les impacts environnementaux ainsi que les mesures compensatrices, de mettre des dispositions afin de prévenir ou de combattre toute forme d’incendie et de faire le devis estimatif et quantitatif.
La structure est de type ossature (semelles isolées, poutres, plancher). Les prescriptions utilisées sont les règles du BAEL 91 modifié 99 – DTU P 18-702, le cahier des prescriptions techniques et les normes françaises NF P 06-004 et NF P 06-001. Pour la descente de charge, le prédimensionnement des éléments porteurs, nous avons préféré une approche manuelle. Le dimensionnement des éléments a été fait manuellement mais le plan de ferraillage a été généré avec le logiciel AutoCad en tenant compte des dispositions constructives.
Pour ce qui est de la partie électricité, la liste des appareils électriques nous a été fournie par le bureau d’étude ayant réalisé la conception électrique du bâtiment. Nous nous sommes servis de cette liste pour calculer la puissance nécessaire pour le fonctionnement de ces appareils et avons ainsi dimensionné le transformateur adéquat.
Le gros œuvre de ce bâtiment a coûté six cent trente-trois millions six cent douze mille trois cent trente-trois francs CFA TTC (633 612 339,8FCFA).
Abstract : The project that has been entrusted to us concerns the study of an R + 4 building. It is a building occupying an area of 1026 m ^ 2 and whose floor height is 3.6 m for the ground floor and 3.4 m for the other levels. The work that has been entrusted to us consists in dimensioning the reinforced concrete structure, in making the electrical sizing, in evaluating the environmental impacts as well as the compensatory measures, in putting in place measures to prevent or combat any form of fire and make the estimate and quantity.
The structure is of the frame type (insulated soles, beams, floor). The prescriptions used are the rules of BAEL 91 modified 99 - DTU P 18-702, the technical specifications and French standards NF P 06-004 and NF P 06-001. For the descent of load, the pre-dimensioning of the load-bearing elements, we preferred a manual approach. The dimensioning of the elements was done manually but the reinforcement plan was generated with the AutoCad software taking into account the constructive provisions.
As for the electrical part, the list of electrical devices was provided to us by the design office that carried out the electrical design of the building. We used this list to calculate the power necessary for the operation of these devices and thus sized the appropriate transformer.
The carcass of this building cost six hundred and thirty-three million six hundred and twelve thousand three hundred and thirty-three CFA francs including tax (633,612,339.8 FCFA). |
Mémoire FPL Master d’ingénierie Génie Civil. Etude d’ingénierie d’un bâtiment R+4 à usage de bureau pour le compte de SYSAID FASO à Ouagadougou au Burkina Faso [texte imprimé] / Abdel Fataye ABDOU MAHAMANE . - 2020 . - 100 p. Langues : Français ( fre) Résumé : | Le projet qui nous a été confié porte sur l’étude d’un bâtiment R+4. C’est un bâtiment occupant une superficie de 1026 m^2 et dont la hauteur sous plancher est de 3,6 m pour le RDC et de 3,4 m pour les autres niveaux. Le travail qui nous a été confié consiste à dimensionner la structure en béton armé, d’en faire le dimensionnement électrique, d’évaluer les impacts environnementaux ainsi que les mesures compensatrices, de mettre des dispositions afin de prévenir ou de combattre toute forme d’incendie et de faire le devis estimatif et quantitatif.
La structure est de type ossature (semelles isolées, poutres, plancher). Les prescriptions utilisées sont les règles du BAEL 91 modifié 99 – DTU P 18-702, le cahier des prescriptions techniques et les normes françaises NF P 06-004 et NF P 06-001. Pour la descente de charge, le prédimensionnement des éléments porteurs, nous avons préféré une approche manuelle. Le dimensionnement des éléments a été fait manuellement mais le plan de ferraillage a été généré avec le logiciel AutoCad en tenant compte des dispositions constructives.
Pour ce qui est de la partie électricité, la liste des appareils électriques nous a été fournie par le bureau d’étude ayant réalisé la conception électrique du bâtiment. Nous nous sommes servis de cette liste pour calculer la puissance nécessaire pour le fonctionnement de ces appareils et avons ainsi dimensionné le transformateur adéquat.
Le gros œuvre de ce bâtiment a coûté six cent trente-trois millions six cent douze mille trois cent trente-trois francs CFA TTC (633 612 339,8FCFA).
Abstract : The project that has been entrusted to us concerns the study of an R + 4 building. It is a building occupying an area of 1026 m ^ 2 and whose floor height is 3.6 m for the ground floor and 3.4 m for the other levels. The work that has been entrusted to us consists in dimensioning the reinforced concrete structure, in making the electrical sizing, in evaluating the environmental impacts as well as the compensatory measures, in putting in place measures to prevent or combat any form of fire and make the estimate and quantity.
The structure is of the frame type (insulated soles, beams, floor). The prescriptions used are the rules of BAEL 91 modified 99 - DTU P 18-702, the technical specifications and French standards NF P 06-004 and NF P 06-001. For the descent of load, the pre-dimensioning of the load-bearing elements, we preferred a manual approach. The dimensioning of the elements was done manually but the reinforcement plan was generated with the AutoCad software taking into account the constructive provisions.
As for the electrical part, the list of electrical devices was provided to us by the design office that carried out the electrical design of the building. We used this list to calculate the power necessary for the operation of these devices and thus sized the appropriate transformer.
The carcass of this building cost six hundred and thirty-three million six hundred and twelve thousand three hundred and thirty-three CFA francs including tax (633,612,339.8 FCFA). |
|