Bienvenue au Centre de Documentation et d'Information de 2iE: Plus de 27422 ouvrages vous sont proposés
A partir de cette page vous pouvez :
Retourner au premier écran avec les dernières notices... | Votre compte |
Détail de l'auteur
Auteur Chamsia M. G. ABDOULAYE KABO
Documents disponibles écrits par cet auteur
Affiner la rechercheMémoire FPL Master d’ingénierie Génie Civil. Dimensionnement d’un bâtiment R+3 avec sous-sol / Chamsia M. G. ABDOULAYE KABO
Titre de série : Mémoire FPL Master d’ingénierie Génie Civil Titre : Dimensionnement d’un bâtiment R+3 avec sous-sol Type de document : texte imprimé Auteurs : Chamsia M. G. ABDOULAYE KABO Année de publication : 2020 Importance : 104 p. Langues : Français (fre) Résumé : Le présent mémoire se situe dans le cadre du dimensionnement d’un bâtiment R+3 avec sous-sol à usage multiple dans la ville de Niamey (NIGER). Elle est entièrement financée par un promoteur privé.
Le dimensionnement consiste à étudier chaque élément de la structure du pré dimensionnement à la note de calcul sur la base des plans architecturaux.
L’ossature du bâtiment est constituée d’une structure en béton armé reposant sur un radier nervuré surmonté de parement en voile. Les normes utilisées en grande parties sont les NF P06-001, NF P 004 et aussi les règles du BAEL 91 modifie 99.
La méthodologie utilisée est celle d’un calcul manuel et de logiciel comme Robot et Pybar. Le dimensionnement est effectué à l’ELU et vérifier à l’ELS, les différents plans sont établies à travers Autocad et Archicad. L’étude des éléments secondaires comme l’électricité, l’assainissement et la sécurité incendie ont été traité.
L’ensemble est suivi d’une étude quantitative et estimative.
Abstract : This memoir is part of the design of an R + 3 building with multipurpose basement in the city of Niamey (NIGER). It is entirely privately funded. Sizing consists of studying each element of the pre-dimensioning structure in the calculation note on the basis of the architectural plans.
The structure of the building consists of a reinforced concrete structure resting on a ribbed raft surmounted by veil facing. The standards used in large parts are NF P06-001, NF P 004 and also the rules of BAEL 91 modify 99.
The methodology used is that of a manual calculation and software like Robot and Pybar.
Sizing is done at the ELU and check at the ELS, the different plans are established through Autocad and Archicad.
The study of secondary elements such as electricity, sanitation and fire safety were dealt with.
The whole is followed by a quantitative and estimated study.Mémoire FPL Master d’ingénierie Génie Civil. Dimensionnement d’un bâtiment R+3 avec sous-sol [texte imprimé] / Chamsia M. G. ABDOULAYE KABO . - 2020 . - 104 p.
Langues : Français (fre)
Résumé : Le présent mémoire se situe dans le cadre du dimensionnement d’un bâtiment R+3 avec sous-sol à usage multiple dans la ville de Niamey (NIGER). Elle est entièrement financée par un promoteur privé.
Le dimensionnement consiste à étudier chaque élément de la structure du pré dimensionnement à la note de calcul sur la base des plans architecturaux.
L’ossature du bâtiment est constituée d’une structure en béton armé reposant sur un radier nervuré surmonté de parement en voile. Les normes utilisées en grande parties sont les NF P06-001, NF P 004 et aussi les règles du BAEL 91 modifie 99.
La méthodologie utilisée est celle d’un calcul manuel et de logiciel comme Robot et Pybar. Le dimensionnement est effectué à l’ELU et vérifier à l’ELS, les différents plans sont établies à travers Autocad et Archicad. L’étude des éléments secondaires comme l’électricité, l’assainissement et la sécurité incendie ont été traité.
L’ensemble est suivi d’une étude quantitative et estimative.
Abstract : This memoir is part of the design of an R + 3 building with multipurpose basement in the city of Niamey (NIGER). It is entirely privately funded. Sizing consists of studying each element of the pre-dimensioning structure in the calculation note on the basis of the architectural plans.
The structure of the building consists of a reinforced concrete structure resting on a ribbed raft surmounted by veil facing. The standards used in large parts are NF P06-001, NF P 004 and also the rules of BAEL 91 modify 99.
The methodology used is that of a manual calculation and software like Robot and Pybar.
Sizing is done at the ELU and check at the ELS, the different plans are established through Autocad and Archicad.
The study of secondary elements such as electricity, sanitation and fire safety were dealt with.
The whole is followed by a quantitative and estimated study.Exemplaires
Code-barres Cote Support Localisation Section Disponibilité aucun exemplaire Documents numériques
KaboAdobe Acrobat PDF