Bienvenue au Centre de Documentation et d'Information de 2iE: Plus de 27422 ouvrages vous sont proposés
Résultat de la recherche
1 recherche sur le mot-clé 'échangeur de chaleur; refroidisseur de gaz; dioxyde de carbone; cycle transcritique; micro-canal; pompe à chaleur; chauffage; eau sanitaire; modélisation - simulation'
Affiner la recherche Générer le flux rss de la recherche
Partager le résultat de cette recherche Faire une suggestion
Water-coupled carbon dioxide microchannel gas cooler for heat pump water heaters: Part II – Model development and validation in Revue internationale du froid, vol 34, issue 1 (janvier 2011)
[article]
Titre : Water-coupled carbon dioxide microchannel gas cooler for heat pump water heaters: Part II – Model development and validation Titre original : Refroidisseur de gaz à microcanaux sur eau souterraine pour des pompes à chaleur au dioxyde de carbone utilisées pour chauffer de l'eau sanitaire : Partie II – Développement et validation du modèle Type de document : texte imprimé Année de publication : 2012 Article en page(s) : pp. 17-28 Langues : Anglais (eng) Français (fre) Catégories : 621.5 : Technique pneumatique, du vide, des basses températures Mots-clés : échangeur de chaleur; refroidisseur de gaz; dioxyde de carbone; cycle transcritique; micro-canal; pompe à chaleur; chauffage; eau sanitaire; modélisation - simulation Index. décimale : 621.56 Technique des basses températures : réfrigération, pompe à chaleur Résumé : An experimental and analytical study on the performance of a compact, microchannel water-carbon dioxide (CO2) gas cooler was conducted. The experimental results addressed in Part I of this study are used here in Part II to develop an analytical model, utilizing a segmented approach to account for the steep gradients in the thermodynamic and transport properties of supercritical CO2. The model predicted gas cooler heat duty with an average absolute deviation of 7.5% with varying refrigerant and water inlet conditions. The segmented model reveals that near the pseudo-critical point, there is a significant local decrease in refrigerant-side thermal resistance, which yields a sharp increase in local heat duty. The impact of this spike on gas cooler performance is analyzed. Results from this study can be used to predict the effect of changing geometric parameters of the heat exchanger without the need for expensive prototype development and testing.
in Revue internationale du froid > vol 34, issue 1 (janvier 2011) . - pp. 17-28[article] Water-coupled carbon dioxide microchannel gas cooler for heat pump water heaters: Part II – Model development and validation = Refroidisseur de gaz à microcanaux sur eau souterraine pour des pompes à chaleur au dioxyde de carbone utilisées pour chauffer de l'eau sanitaire : Partie II – Développement et validation du modèle [texte imprimé] . - 2012 . - pp. 17-28.
Langues : Anglais (eng) Français (fre)
in Revue internationale du froid > vol 34, issue 1 (janvier 2011) . - pp. 17-28
Catégories : 621.5 : Technique pneumatique, du vide, des basses températures Mots-clés : échangeur de chaleur; refroidisseur de gaz; dioxyde de carbone; cycle transcritique; micro-canal; pompe à chaleur; chauffage; eau sanitaire; modélisation - simulation Index. décimale : 621.56 Technique des basses températures : réfrigération, pompe à chaleur Résumé : An experimental and analytical study on the performance of a compact, microchannel water-carbon dioxide (CO2) gas cooler was conducted. The experimental results addressed in Part I of this study are used here in Part II to develop an analytical model, utilizing a segmented approach to account for the steep gradients in the thermodynamic and transport properties of supercritical CO2. The model predicted gas cooler heat duty with an average absolute deviation of 7.5% with varying refrigerant and water inlet conditions. The segmented model reveals that near the pseudo-critical point, there is a significant local decrease in refrigerant-side thermal resistance, which yields a sharp increase in local heat duty. The impact of this spike on gas cooler performance is analyzed. Results from this study can be used to predict the effect of changing geometric parameters of the heat exchanger without the need for expensive prototype development and testing.